FOOD WASTE DISPOSE - FAQ

How does the HydroMaid work?

As water enters the HydroMaid through a separate valve, the water forces a piston to move back and forth 340 degrees. Attached to the piston are a series of five stainless steel cutting blades. These blades cut, shred, and chop food waste as the piston, moves back and forth using water pressure that is plumbed directly into the unit.

What is the number one cause of a disposal breakdown?

Corrosion in one form or anther is related to 90% of breakdown. Other customer concerns are chronic jamming, not grinding properly, clogging drain lines and noise. The HydroMaid disposals are made of non-corrosion materials that prevent corrosion, therefore, we can offer a lifetime warranty against corrosion. The HydroMaid grinds more efficiently, finer and quieter than all of the leading brands because of our fine intermittent stainless steel blades and our use of quiet flowing water instead of electricity to power our disposal.

Why is the HydroMaid unit so quiet?

Because we use the quiet power of water to create torque to process the food rather than the use of electricity and a noisy high speed motor.

What is the measurement for the water supply valve?

1 3/8".

What if I have problems with my HydroMaid, who do I get a hold of to fix it?

ANDEG main office 380(44)4942796

Can I drill a hole in any type of material for the water supply valve hole?

Yes-using a specified hole saw for your type of material.

Who manufactures the HydroMaid?

HydroMaid International, Inc. (USA)

Will it work with a septic tank system?

Yes, as long as water pressure is 40 lbs or more. The HydroMaid grinds all food fine enough so the biological action in the septic system can function trouble free.

What is the difference between a batch feed and a continuous feed unit?

Continuous feed disposals are found in a majority of homes. Food can be continually fed into the unit while water washes through the system. It is activated by a wall switch, or in our case, a simple on and off water valve located on your sink. A batch feed unit must be loaded in batches. A batch of waste would be loaded in the grind chamber. The stopper is then placed in the unit and turned. The activation device is located in the stopper.

Who is the right customer for the HydroMaid?

The HydroMaid is excellent for the light user to the large family that uses their disposal for large food preparation and clean-up. This unit is sold for domestic use and is the best that money can buy.

I do not have a disposal now, why should I buy one?

Disposals are the key to convenience and a more healthful sanitary environment. During meal preparation or clean-up scraps can be placed directly in the disposal. It reduces odors or food storage bags and instantly removes food waste to protect the house against insects and rodents.

How much water pressure do you need to run my HydroMaid?

40 lbs or more.

How hard is it to install?

Easy, you can use the installation manual and video that comes with your HydroMaid, or you can follow the instructions on this site.

Does the water supply valve have to go on top of the sink, or can it be hidden?

No-it can be hidden under the sink if preferred.

Can it be installed with an aluminum or granite sink?

Yes-using a specified hole saw for your type of material.

What type of warranty does my HydroMaid have?

The HydroMaid has an unprecedented lifetime warranty on the stainless steel blades and the housing. All other components have a10 year warranty. Any HydroMaid that fails to operate due to defects in workmanship or materials will be repaired or replaced by HydroMaid International, Inc.